What to look for in a video tripod | Tech, No Babel

What to look for in a video tripod

Listen to the audio:

Join the conversation; call 1-877-763-3246, leave a comment below the video, or hit me up on Twitter (@PaulAlanClif)

On today’s Tech, No Babel: What to look for in a video tripod

When you’re shopping for a video tripod, it might be tempting to buy the cheapest one you can find, but that’s probably not the best idea. What about if you have access to a really, really nice tripod, but a small, lightweight camera? Is that a good idea?

Fluid head: This is a non-starter if you find a tripod without a fluid head. The movements will be jerky if you do buy one without this type of head.

Appropriate size for the weight of the camera: If your camera is too big for the tripod, you risk failure and breaking the camera. If it’s too small, you’ll never get the tripod balanced right. Make sure you get the right one.

Weight for its use: Buy a light tripod for portable use, but get a heavier one if it will always be in one place.

Two pan bars: If it will ever be used in a studio configuration (or in your church service), you want two pan bars so that the operator can push and pull for more reliable movements and so that you can attach zoom and focus controls to it.

Adjustable tripod plate: You need to be able to more the tripod plate forward and backward to balance the camera.

Separate friction and lock for both pan and tilt: There should be at least four controls on the head. They are pan friction, pan lock, tilt friction, and tilt lock. Once an operator sets the friction to what’s comfortable, he or she should be able to lock the tripod and walk away, unlocking it easily and not having to reset friction.

Bubble level: A video tripod should be able to be levelled and you need to be able to tell by looking at a bubble level which accurately reflects how level the camera is.

Adjustable tripod head bowl, avoid columns: Center columns on tripods provide additional height, but can be quite unstable. It’s better to have a bowl that allows for fine leveling of the head than sacrifice it for a design that’s inherently unstable.

Optional spreader and dolly: If the tripod will always be stationary, you want a spreader to keep the legs in place. If it’s going to be mobile, consider a dolly to allow for smooth movements.

Now, it’s your turn. What have I left out? What tripods have worked for you in your situation? Leave your answer in the comments below.

If you’d like to chip in a few bucks, anything you do is appreciated. Just click this link to donate.

About this show:

If you do video or graphic design to advance your church’s mission, this show is for you.

How to Subscribe to the show (for free):

Subscribe to

Tech, No Babel: Church video and graphic design tips

Or subscribe with your favorite app by using the address below

Subscribe to

TNoB video

Or subscribe with your favorite app by using the address below

Subscribe on YouTube

For more questions, comments, or snide remarks, comment below or contact me at:
Facebook or Twitter
More video can be found on YouTube.com
Also check out my Google+ page

Paul Alan Clifford, M.Div.

Paul Alan Clifford, M.Div. has been a tech volunteer with Quest Community Church in Lexington, KY since 2000 and is the founder of TrinityDigitalMedia.com, llc. He became part of the technology in ministry team when his church’s attendance was around 200 in one Sunday service and has witnessed it’s growth to 5,200 average weekly attendance in one Saturday service, four Sunday services in one online and two physical campuses. He literally wrote the book on podcasting in churches, twitter in churches, & servant-hearted volunteering, as well as writing various articles for publications like “Church Production” and “Technologies for Worship” magazines.